How to send MIDI clock from Ableton Live to Minotor and other lighting software
November 2026 ยท minotor.org
Minotor times every animation from MIDI clock, 24 ticks per quarter note, and takes the first beat from the Start message (rhythm theory). Ableton Live can send that clock to any program on the same computer. Live's side is one switch, as long as there is a MIDI port between the two programs. Minotor's side is less obvious: out of the box it ignores clock on every port, and the setting that changes this sits in its mapping editor.
The Live steps follow Ableton's help centre articles on MIDI sync and MIDI settings. The Minotor steps are read from its source at the final commit, 9251ecf. We have not run the two together on one machine, so treat this as a map and check each step against what you see.
Step 1: a MIDI port between the two programs
Ableton's sync article lists three ways to connect: a MIDI cable to hardware, MIDI over USB, and for programs on the same computer a virtual MIDI bus. Lighting software running beside Live needs the last one.
macOS
When Minotor starts on a Mac it creates its own input port called Virtual MIDI In. Other programs see it as a MIDI destination, so it should show up in Live's list of output ports while Minotor is running, with nothing else to install.
If you would rather use a fixed port, or your lighting program does not create one, turn on Apple's IAC Driver:
- Open Audio MIDI Setup and choose Window, Show MIDI Studio.
- Double-click IAC Driver.
- Tick "Device is online". If the port list is empty, add one with the Add button, then click Apply.
Windows
Minotor cannot create a virtual port on Windows. The MIDI library it uses only supports that on macOS and Linux, and the Windows code checks for it and skips the port. You need a loopback port that both programs open:
- loopMIDI by Tobias Erichsen, a small tray program that creates named loopback ports. Its page lists Windows 7 to Windows 10, and the ports exist only while it runs.
- On Windows 11, the loopback endpoints in Windows MIDI Services. Microsoft's announcement of February 2026 says they are created in the MIDI Settings app from the Windows MIDI Services Tools download and are available to MIDI 1.0 applications without extra drivers.
On Linux the Virtual MIDI In port appears in ALSA as well, which helps if your clock comes from a sequencer that runs there.
Step 2: switch on Sync in Live
- Open Live's Settings (Preferences in older versions) and go to Link, Tempo & MIDI, then the MIDI tab.
- Under MIDI Ports, find the output port: Virtual MIDI In, the IAC bus, or your loopMIDI port.
- Turn its Sync switch on. Track and Remote can stay off for clock alone.
- Press play. The Sync out indicator shows that clock is going out.
An IAC bus or a loopMIDI port appears in Live as both an input and an output. Ableton's MIDI settings article warns against turning Sync on for both sides of one device unless you need to, because it creates a feedback loop. Switch it on for the output only.
Ableton's own note at the top of its sync article is that if the other app supports Ableton Link, Link is the better choice. Minotor has no Link support and reads only MIDI. Among the programs on our alternatives page, Resolume Arena takes both.
MIDI Clock Type: Song or Pattern
For outgoing clock Live offers a clock type menu with two entries. According to Ableton, Song sends Song Position Pointer messages along with the clock, which is useful when another DAW follows Live. Pattern is the one Ableton recommends for drum machines and grooveboxes that loop patterns.
Minotor's MIDI code handles Clock, Start, Stop and Continue and has no case for Song Position Pointer, so for Minotor the choice changes nothing it reads. Other lighting programs may behave differently, so check their manual if they offer a position or timecode mode.
Step 3: tell Minotor to accept clock
Minotor reads clock only on a port whose mapping allows it, and all three mappings that ship with it (Korg nanoKONTROL, nanoKONTROL2 and a generic piano keyboard) have sync turned off. A port set to "no mapping" is closed altogether. So the first job is a mapping of your own:
- Open File, Configuration (F10) and go to the Midi mapping tab.
- Pick NEW MAPPING. Fill in Manufacturer and Product name, for example Ableton and Live.
- Under Midi messages, switch Sync on.
- Click Save... and keep the suggested folder, which is Minotor's data folder. Mappings saved there appear in its menus next to the built-in ones.
- On the Midi interfaces tab, find the port Live sends to and choose your new mapping in its menu. The small square next to the port name shows whether it is open.
Then switch the source. In the main window the clock source button reads Internal; click it so it reads External. From then on the transport follows Live: Start resets the beat count and starts the animations, Stop halts them, and Continue resumes without a reset. The BPM field updates on every beat from the incoming ticks, the same way the tap button measures a tempo.
MIDI Clock Sync Delay
Audio buffers on both sides mean the lights and the speakers rarely line up on the first try. Live has a MIDI Clock Sync Delay for each output port, shown when you unfold the port's entry. Ableton's method is to run a metronome on both sides and turn the delay until they match. Minotor has no metronome, so put the Flash animation (a flash on the beat, with its Loop at one beat) on air and turn the delay until the flash lands with Live's click. Ableton notes that it takes a couple of bars after pressing play before the two settle.
A missed downbeat is a different problem. If Minotor joins after Live has started, it never saw the Start message and counts beats from the wrong tick. The Sync button next to the transport sets the first beat by hand, as rhythm theory describes, or you can stop and restart Live.
If nothing moves
- The Sync out indicator in Live stays dark: Sync is on for the wrong port, or the transport is not running.
- Live is sending but Minotor's tempo does not change: the port has no mapping with Sync on, or the clock source button still says Internal.
- Virtual MIDI In is missing from Live: the port exists only while Minotor runs, so start Minotor first and Live second. On Minotor's side, the Midi interfaces tab rescans for ports twice a second while it is open.
- You still need Minotor itself: the download page covers building it on a current system.
Sources
Read on 26 October 2026:
- Ableton help centre: Synchronizing Live via MIDI and Live's MIDI Settings
- Ableton Live 12 manual, Synchronizing with Link, Tempo Follower, and MIDI
- Apple, Transfer MIDI information between apps in Audio MIDI Setup
- Tobias Erichsen, loopMIDI; Microsoft, Making music with MIDI just got a real boost in Windows 11
- Minotor at commit
9251ecf, github.com/minotor-org/minotor:Core/Midi/midi.cpp,Core/Midi/midiinterface.cpp,Core/minoclocksource.cpp,Ui/configdialog.cpp,Ui/configdialog.ui,Ui/mainwindow.cpp, themappings/folder and the bundled RtMidi
If you sync Minotor to Live and a step here does not match what you see, write to [email protected].
